SPECIFICATION FOR
MODEL: 50127AOX WILKENS X-SERIES EXPANDING WALL, WALKING FLOOR, OPEN TOP,
STEEL TRANSFER TRAILER
CAPACITY:
127 Cubic Yards
OUTSIDE
DIMENSIONS
INSIDE DIMENSIONS
- LENGTH............................... 50’
E.
LENGTH................................... 47’9”
- HEIGHT................................
13’6” F.
HEIGHT FRONT.....................
104”
- WIDTH FRONT..................
102” G.
HEIGHT REAR....................... 104”
- WIDTH REAR.....................
102” H. WIDTH
FRONT..................... 96”
I. WIDTH REAR........................ 96”
TRAILER FEATURES
- SIDEWALL.......................... FRONT 2/3 .125
ALUMINUM SHEET-POST,BI-FOLD REAR SECTION 14GA. STEEL
- TOP RAIL............................ ALUMINUM EXTRUDED
4” x 6” x 6061 T-6
- SPREADER BAR................ 3” X 3” X1/4” STEEL TUBE
- BOTTOM RAIL.................. 7GA FORMED STEEL TUBE
- KING PIN/LAST AXLE..... 44’
- KING PIN SETTING........... 36” WITH 5/16” STEEL T-1
PLATE
- SUB-FRAME....................... W12 x 30# I-BEAM
- LANDING GEAR................ HOLLAND MARK V, SELF
LEVELING SHOE
- GEAR SUPPORT................. 7GA
- GEAR BRACES................... 3” CHANNEL
- SUSPENSION...................... TANDEM HT 9700 SPRING
- AXLES & BRAKES............ (2) 5” ROUND, 25,000#
AXLES, 4S2M ABS WITH TOP MOUNT CHAMBERS
- HUBS.................................... 10 BOLT
UNIMOUNT
- RIMS..................................... ALUMINUM
DISC
- TIRES.................................... 11R X 22.5,
14PLY
- REAR DOOR....................... SPECIAL STEEL DOUBLE
DOOR WITH RACHET LATCH
- FRONT PANELS................. .125 ALUMINUM SHEET &
POST
KING PIN
SECTION................... FABRICATED FROM ½” T-1 PLATE
CROSSMEMBERS...................... 4” X 3.2# ON 12’ CENTERS, STEEL I-BEAM
LIGHT
SYSTEM.......................... TRUCK LIGHT 40 SERIES, LIGHTS IN BUMPER
COVER.......................................... FRONT 2/3 ROLL TARP, REAR 13’
SPECIAL MANUAL FLIP TOP
UNLOADING SYSTEM.............
KEITH RUNNING FLOOR II
FLOOR
THICKNESS.................. #2190 KEITH FLOORING
LANDFILL EQUIPMENT.......... TOW
HOOKS, PUSH BUMPERS, CATWALK, LADDER, IN-LINE PRESSURE FILTER
METAL PREPARATION..........
EXTERIOR SANDBLASTED, EPOXY PRIMER
PAINT.......................................... GRAY ENAMEL
FRONT
CORNERS...................... 10” DIAGONAL RADIUS
WEIGHT 19,900#
