SERIES:  ARO

 

SPECIFICATION FOR MODEL:  WILKENS ALUMINUM COMPOSITE OPEN TOP, TIPPER FLOOR TRANSFER                                                            

                                                             TRAILER

CAPACITY:  110 - 135 CU. YD.

OUTSIDE DIMENSIONS
  A. LENGTH............................... 40’ - 53’
  B. HEIGHT................................ 13’6”
  C. WIDTH FRONT................... 102”
  D. WIDTH REAR...................... 102”
INSIDE DIMENSIONS
  E. LENGTH............................... 39’9” – 52’9”
  F. HEIGHT FRONT................. 104”
  G. HEIGHT REAR.................... 104”
  H. WIDTH FRONT................... 96”
  I. WIDTH REAR...................... 96”
  H. WIDTH FRONT...................... 93”
 TRAILER FEATURES
  J. SIDEWALL........................... 5052H32 .125 ALUMINUM SHEET WITH 6061T6 ALUMINUM POSTS  ON 15” CENTERS
  K. TOP RAIL............................. WILKENS HEAVY DUTY ALUMINUM TUBE 4”x 6”x 3/8”
  L. SPREADER BAR................. 3” x 3” x 1/4” STEEL TUBE
  M. BOTTOM RAIL................... 10GA. FORMED STEEL TUBE
  N. KING PIN/LAST AXLE...... 36’ – 47’
  O. KING PIN SETTING........... 48” WITH 5/16” STEEL T-1 PLATE
  P. SUB-FRAME........................ 4” X 8” X 3/16” STEEL TUBE
  Q. LANDING GEAR................ HOLLAND MARK V
  R. GEAR SUPPORT................. 7GA
  S. GEAR BRACES.................... 3” CHANNEL
  T. SUSPENSION....................... HUTCH TANDEM 9700 SINGLE LEAF SPRING, 48,000# CAPACITY
  U. AXLES & BRAKES.............. (2) 5” ROUND, 25,000# AXLES, 452M ABS WITH TOP MOUNT   CHAMBERS
  V. HUBS.................................... 10 BOLT
  W. RIMS..................................... STEEL DISC
  X. TIRES.................................... 11R X 22.5, 14PLY
  Y. REAR DOOR........................ CURBSIDE SWING, H.D. HINGES – TOP HINGED
  Z. FRONT PANELS................. 5052H32 .125 ALUMINUM SHEETS WITH 6061T6 POSTS
  KING PIN SECTION................... FABRICATED FROM ½” T-1 PLATE
  CROSSMEMBERS....................... 4” X 3.2# ON 15” CENTERS, STEEL I-BEAM
  LIGHT SYSTEM.......................... TRUCK LIGHT 40 SERIES, LIGHT IN DOOR
  COVER.......................................... ROLL TARP REAR CRANK
  UNLOADING SYSTEM.............. TIPPER FLOOR
  FLOOR THICKNESS................... ¼” ALUMINUM
  LANDFILL EQUIPMENT.......... TOW HOOKS, PUSH BUMPERS
  METAL PREPARATION........... EXTERIOR SANDBLASTED, EPOXY PRIMER
  PAINT........................................... ENAMEL
  FRONT CORNERS...................... 10” DIAGONAL RADIUS
  WEIGHT....................................... 13,000# - 15,500#